Rubio Monocoat

Rubio Monocoat Rubio Monocoat 1L - Pure
Rubio Monocoat Oil Plus colours and protects your wood in one single layer. Unlike the traditional hardwax oils, Rubio Monocoat Oil Plus will connect with the wood ply by means of a molecular reaction, as a result of which a durable protection is obtained. This molecular connection enables the Rubi o Monocoat Oil Plus to embed in the surface’s upper microns immediately. The wood fibres can only combine with a certain amount of oil. Oil, which has not reacted, doesn’t bed and needs to be removed. Renovation Where scratches or burn marks are present, or where heavy wear is showing (either in patches or large areas of the floor) a renovation treatment with Rubio Monocoat Oil Plus is recommended. Local repair is easy: only the wood fibres, which have come free through damage, will combine with new oil. It also applies if a completely new colour is desired over the entire surface aerea of a previously treated floor. Please consult our instructions sheet on renovation. Time scedule Day 1 * Stirr the Rubio Monocoat Oil Plus thouroughly. Apply the product all over the surface * with a cloth, a wiper with a cloth, or a polishing machine. * Allow the product to react for a couple of minutes. * Wipe off all surplus product with a polishing machine within 15 to 20 minutes. Day 2 * After 24-36 hours the furniture and other interior decoration can be put back in place. * Areas with very heavy traffic should preferably be protected for +/- one week, with a porous material, 48 hours after application of Rubio Monocoat Oil Plus. After the treatment with Rubio Monocoat Oil Plus, the floor requires 3 weeks to harden completely. For more information about maintenance and renovation, please consult our leaflet 'Maintenance and renovation'. ATTENTION! Do not use the product without consulting the full instruction and technical data sheet. For tropical wood: use RMC Oil Plus 2C!

Rubio Monocoat Monocoat Sample Pot - 100ml
This is the sample pot for the normal Monocoat Oils. It can also be used for touching up any scratches, marks, etc on any floor finished with Monocoat products.

Rubio Monocoat Rubio Monocoat Floor Soap 2L
Daily cleaning : The floor can be cleaned with a floorwiper with a dry cloth or can be wiped with a brush. Spots can be removed with : Rubio Renovator Oil. Weekly cleaning : Floors treated with Monocoat Oil can be cleaned with water and Monocoat Soap : Wipe the floor and remove the dust. Poor 150 ml Monocoat Soap in a bucket of cold water (10L). Use 2 buckets : one for the mixture of water and soap and another one for water only. Humidify the mop with the soap mixture. Clean the first part of the floor. Rinse the mop in the bucket with clean water. Humidify the mop with the soap mixture. Clean the next part of the floor. Do not leave any water on the floor. It is only necessary to humidify the floor. It is possible to walk on the floor after the floor is completely dry (15 min.). ATTENTION! It is recommended to clean the floor with a floorwiper and a dry towel during the first 3 weeks after the Monocoat Oil has been applied on the floor. After a period of 3 weeks the floor can be cleaned with a mixture of water and Monocoat Soap.

Rubio Monocoat Rubio Monocoat Surface Care Spray
Monocoat Soap Premixed and ready to use in a convenient spray bottle for spot cleaning.

Rubio Monocoat Rubio Monocoat 1L - Black
Rubio Monocoat Oil Plus colours and protects your wood in one single layer. Unlike the traditional hardwax oils, Rubio Monocoat Oil Plus will connect with the wood ply by means of a molecular reaction, as a result of which a durable protection is obtained. This molecular connection enables the Rubi o Monocoat Oil Plus to embed in the surface’s upper microns immediately. The wood fibres can only combine with a certain amount of oil. Oil, which has not reacted, doesn’t bed and needs to be removed. Renovation Where scratches or burn marks are present, or where heavy wear is showing (either in patches or large areas of the floor) a renovation treatment with Rubio Monocoat Oil Plus is recommended. Local repair is easy: only the wood fibres, which have come free through damage, will combine with new oil. It also applies if a completely new colour is desired over the entire surface aerea of a previously treated floor. Please consult our instructions sheet on renovation. Time scedule Day 1 * Stir the Rubio Monocoat Oil Plus thouroughly. Apply the product all over the surface * with a cloth, a wiper with a cloth, or a polishing machine. * Allow the product to react for a couple of minutes. * Wipe off all surplus product with a polishing machine within 15 to 20 minutes. Day 2 * After 24-36 hours the furniture and other interior decoration can be put back in place. * Areas with very heavy traffic should preferably be protected for +/- one week, with a porous material, 48 hours after application of Rubio Monocoat Oil Plus. After the treatment with Rubio Monocoat Oil Plus, the floor requires 3 weeks to harden completely. For more information about maintenance and renovation, please consult our leaflet 'Maintenance and renovation'. ATTENTION! Do not use the product without consulting the full instruction and technical data sheet. For tropical wood: use RMC Oil Plus 2C!

Rubio Monocoat Rubio Monocoat 1L - Oak
Rubio Monocoat Oil Plus colours and protects your wood in one single layer. Unlike the traditional hardwax oils, Rubio Monocoat Oil Plus will connect with the wood ply by means of a molecular reaction, as a result of which a durable protection is obtained. This molecular connection enables the Rubi o Monocoat Oil Plus to embed in the surface’s upper microns immediately. The wood fibres can only combine with a certain amount of oil. Oil, which has not reacted, doesn’t bed and needs to be removed. Renovation Where scratches or burn marks are present, or where heavy wear is showing (either in patches or large areas of the floor) a renovation treatment with Rubio Monocoat Oil Plus is recommended. Local repair is easy: only the wood fibres, which have come free through damage, will combine with new oil. It also applies if a completely new colour is desired over the entire surface aerea of a previously treated floor. Please consult our instructions sheet on renovation. Time scedule Day 1 * Stir the Rubio Monocoat Oil Plus thouroughly. Apply the product all over the surface * with a cloth, a wiper with a cloth, or a polishing machine. * Allow the product to react for a couple of minutes. * Wipe off all surplus product with a polishing machine within 15 to 20 minutes. Day 2 * After 24-36 hours the furniture and other interior decoration can be put back in place. * Areas with very heavy traffic should preferably be protected for +/- one week, with a porous material, 48 hours after application of Rubio Monocoat Oil Plus. After the treatment with Rubio Monocoat Oil Plus, the floor requires 3 weeks to harden completely. For more information about maintenance and renovation, please consult our leaflet 'Maintenance and renovation'. ATTENTION! Do not use the product without consulting the full instruction and technical data sheet. For tropical wood: use RMC Oil Plus 2C!

Rubio Monocoat Rubio Monocoat 1L - Smoked Oak
Rubio Monocoat Oil Plus colours and protects your wood in one single layer. Unlike the traditional hardwax oils, Rubio Monocoat Oil Plus will connect with the wood ply by means of a molecular reaction, as a result of which a durable protection is obtained. This molecular connection enables the Rubi o Monocoat Oil Plus to embed in the surface’s upper microns immediately. The wood fibres can only combine with a certain amount of oil. Oil, which has not reacted, doesn’t bed and needs to be removed. Renovation Where scratches or burn marks are present, or where heavy wear is showing (either in patches or large areas of the floor) a renovation treatment with Rubio Monocoat Oil Plus is recommended. Local repair is easy: only the wood fibres, which have come free through damage, will combine with new oil. It also applies if a completely new colour is desired over the entire surface aerea of a previously treated floor. Please consult our instructions sheet on renovation. Time scedule Day 1 * Stir the Rubio Monocoat Oil Plus thouroughly. Apply the product all over the surface * with a cloth, a wiper with a cloth, or a polishing machine. * Allow the product to react for a couple of minutes. * Wipe off all surplus product with a polishing machine within 15 to 20 minutes. Day 2 * After 24-36 hours the furniture and other interior decoration can be put back in place. * Areas with very heavy traffic should preferably be protected for +/- one week, with a porous material, 48 hours after application of Rubio Monocoat Oil Plus. After the treatment with Rubio Monocoat Oil Plus, the floor requires 3 weeks to harden completely. For more information about maintenance and renovation, please consult our leaflet 'Maintenance and renovation'. ATTENTION! Do not use the product without consulting the full instruction and technical data sheet. For tropical wood: use RMC Oil Plus 2C!

Rubio Monocoat Rubio Monocoat 1L - Dark Oak
Rubio Monocoat Oil Plus colours and protects your wood in one single layer. Unlike the traditional hardwax oils, Rubio Monocoat Oil Plus will connect with the wood ply by means of a molecular reaction, as a result of which a durable protection is obtained. This molecular connection enables the Rubi o Monocoat Oil Plus to embed in the surface’s upper microns immediately. The wood fibres can only combine with a certain amount of oil. Oil, which has not reacted, doesn’t bed and needs to be removed. Renovation Where scratches or burn marks are present, or where heavy wear is showing (either in patches or large areas of the floor) a renovation treatment with Rubio Monocoat Oil Plus is recommended. Local repair is easy: only the wood fibres, which have come free through damage, will combine with new oil. It also applies if a completely new colour is desired over the entire surface aerea of a previously treated floor. Please consult our instructions sheet on renovation. Time scedule Day 1 * Stirr the Rubio Monocoat Oil Plus thouroughly. Apply the product all over the surface * with a cloth, a wiper with a cloth, or a polishing machine. * Allow the product to react for a couple of minutes. * Wipe off all surplus product with a polishing machine within 15 to 20 minutes. Day 2 * After 24-36 hours the furniture and other interior decoration can be put back in place. * Areas with very heavy traffic should preferably be protected for +/- one week, with a porous material, 48 hours after application of Rubio Monocoat Oil Plus. After the treatment with Rubio Monocoat Oil Plus, the floor requires 3 weeks to harden completely. For more information about maintenance and renovation, please consult our leaflet 'Maintenance and renovation'. ATTENTION! Do not use the product without consulting the full instruction and technical data sheet. For tropical wood: use RMC Oil Plus 2C!