0% Finance

Powered By Klarna

OSMO UV Protection Oil 420 Clear Extra Satin 0.75L
OSMO UV Protection Oil 420 Clear Extra Satin 0.75L

OSMO UV Protection Oil 420 Clear Extra Satin 0.75L

For delivery on 07 October order in the next
00 Days : 00 Hours : 00 Mins : 00 Secs
Special Price £25.00 Regular Price £34.99
  • 1+ £34.99 £28.98 per item
17% Off! Saving £6.01

OSMO 420 UV Protection Oil - Clear Extra (With active ingredients)

Product description:
Osmo Oak UV-Protection-Oil Extra is a satin-matt finish for exterior. It is based on natural oils, is microporous and does not crack, flake, peel or blister. As a stand alone finish, with two coats, it delays the greying process on vertical surfaces by UV-Protection factor 12 in comparison to untreated wood. The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.
 
Product based on natural oil:
Osmo Oak UV-Protection-Oil Extra is based on natura l vegetable oils. Natural oils penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from drying and becoming brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.
 
Health and environment:
The principle of Osmo to manufacture and supply only products which are safe and environmentally friendly during production as well as for application resulted in the successful certification according to DIN EN ISO 9001:2000 (quality management) and DIN EN ISO 14001
(environmental management).
 
Recommended use:
For all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and windowsills, carports, timber cladding, balcony, screens & fences, pergolas, garden houses and furniture.
 
Number of coats required:
2 coats
 
Coverage:
Approx. 24 m² per litre with one coat
 
Stripped and rough sawn wood need more material because of their surface structure.
 
Surface preparation:
Wood surface must be clean, dry and frost-free (maximum moisture content 20 %). Osmo Oak UV-Protection-Oil Extra is ready to use, please do no thin, stir well before use. Clean old microporous finishes thoroughly. Remove old varnishes. Please do not sand even surfaces finer than P120. Always wear a dust mask when sanding. If additional protection against blue stain, rot and mildew is required for outdoors pre-treat (if possible from all sides) with Osmo Base Coat WR* (*Use biocides safely. Always read the label and product information before use)
 
Methods of application
Apply evenly along the wood grain with either an Osmo Natural Bristle Brush or the Osmo Microfibre Roller and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. When renovating clean the surface thoroughly and allow to dry before applying one further coat of Oak UV-Protection-Oil Extra. Make sure that the surface has been cleaned.
0% PayPal Finance

Enjoy 0% interest for 4 months on every basket total of £99.00 or more

Free delivery over £500*

On laminate, vinyl, engineered & solid flooring

Price promise guarantee

We will match or beat the price!

14-day returns policy

Cancel up to 14 days after the day of delivery for a full refund*

0% Credit Available

Our customers say

.

OSMO 420 UV Protection Oil - Clear Extra (With active ingredients)

Product description:
Osmo Oak UV-Protection-Oil Extra is a satin-matt finish for exterior. It is based on natural oils, is microporous and does not crack, flake, peel or blister. As a stand alone finish, with two coats, it delays the greying process on vertical surfaces by UV-Protection factor 12 in comparison to untreated wood. The finish contains active ingredients which protect it from mould, algae and fungal attack. Easy to renew, no sanding or primer necessary. Easy to apply, will not dry during application.
 
Product based on natural oil:
Osmo Oak UV-Protection-Oil Extra is based on natura l vegetable oils. Natural oils penetrate deeply into the wood, keeping it elastic and healthy, and preventing it from drying and becoming brittle. The wood is allowed to breathe. Moisture can evaporate. Shrinking and swelling are reduced.
 
Health and environment:
The principle of Osmo to manufacture and supply only products which are safe and environmentally friendly during production as well as for application resulted in the successful certification according to DIN EN ISO 9001:2000 (quality management) and DIN EN ISO 14001
(environmental management).
 
Recommended use:
For all vertical exterior woods (dimensionally and non-dimensionally stable): doors, windows and windowsills, carports, timber cladding, balcony, screens & fences, pergolas, garden houses and furniture.
 
Number of coats required:
2 coats
 
Coverage:
Approx. 24 m² per litre with one coat
 
Stripped and rough sawn wood need more material because of their surface structure.
 
Surface preparation:
Wood surface must be clean, dry and frost-free (maximum moisture content 20 %). Osmo Oak UV-Protection-Oil Extra is ready to use, please do no thin, stir well before use. Clean old microporous finishes thoroughly. Remove old varnishes. Please do not sand even surfaces finer than P120. Always wear a dust mask when sanding. If additional protection against blue stain, rot and mildew is required for outdoors pre-treat (if possible from all sides) with Osmo Base Coat WR* (*Use biocides safely. Always read the label and product information before use)
 
Methods of application
Apply evenly along the wood grain with either an Osmo Natural Bristle Brush or the Osmo Microfibre Roller and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. When renovating clean the surface thoroughly and allow to dry before applying one further coat of Oak UV-Protection-Oil Extra. Make sure that the surface has been cleaned.
Customer Questions
No Questions
Please, mind that only logged in users can submit questions

For more information please go to the Delivery Information page.