Installation Guide
Installation instructions are available from your SplashPanel PVC Waterproof Panelling supplier and are also included within the product packaging.
1. Start by fitting an End U Cap or Scotia Trim as required to the wall.
2. Apply a continuous thick bead of adhesive around the periphery edge of the panel (50mm in from the panel edge), followed by further horizontal beads of adhesive spaced at 450mm centres across the back of the panel. Angle the panel edge fully into the previously fixed starting profile trim and firmly locate the panel onto the wall so that the adhesive on the back of the panel makes full contact with the wall at all points. Where a timber batten frame system has been fixed to the walls apply the beads of adhesive to the battens first rather than the back panel and then locate the panel in the same manner onto the adhesive / battens.
3. Apply panel adhesive to the reverse of the next panel and fully insert the panel’s tongue into the previous panel’s groove adding a small silicone bead at the joint.
4. If H type mid-joint trims are being used to cover panel joints the H joint profiles adhere using panel adhesive.
Login and Registration Form