HARO Clean & Green Aqua Oil Parquet Care 1000ml 409472

With clean & green aqua oil, caring for oiled surfaces (Parquet, Cork Floors and HARO Spa Parquet) is now so easy that you can do it yourself - without a floor polishing machine or extra costs. Additionally, clean & green aqua oil is produced based on linseed oil and is therefore environmentally friendly and ensures optimum floor care.

For which floors is clean & green aqua oil suitable?
clean & green aqua oil is a vendor-neutral care product, which has been developed especially for all oiled surfaces, as well as HARO Spa Parquet.

Why is the maintenance of oiled parquet floors and oiled cork floors so important?
In order to ensure that your oiled parquet or cork floor and your HARO Spa Parquet always look naturally fresh and beautiful, it is important to care for the surfaces of your oiled floor regularly and whenever necessary.

When can and should clean & green aqua oil be used?
clean & green aqua oil is suitable both for initial and subsequent treatment of oiled parquet surfaces and cork surfaces as well as HARO Spa Parquet Floors.

What is the correct way to apply clean & green aqua oil?

clean & green aqua oil is very simple to apply. Give your oiled parquet floor, oiled cork floor or HARO Spa Parquet a beauty treatment whenever necessary - with just a few steps it will shine just like it did on day one.

STEP 1
Fully clear the area to be cleaned and clean using a soft broom or vacuum cleaner. A vacuum cleaner with special brushes for parquet floors is ideal for this purpose.

STEP 2
Clean the area thoroughly, using the clean & green active cleaning product. You will need a bucket as well as a floor cleaner set. Add half a dosage cap of clean & green active to 5 litres of cold water. Now dip in the head of the mop and wring it out thoroughly. Wipe the surface of the floor with the damp mop (avoid letting water stand) and allow to dry.

STEP 3
For best results, wipe again with clean water in order to remove any loosened dirt particles. Wait until the floor is completely dry.

STEP 4
Add the clean & green aqua oil parquet cleaner undiluted to a suitable bucket. Apply the care product to your parquet floor in evenly thick and overlapping layers using the mop head of the "Wischwiesel" flat wet-mop. Always apply lengthways, in the board direction.

STEP 5
Now allow the cleaning product to take effect. The floor can be walked on again after only two hours.

Coverage: 1L = Approx. 50m2 (Depending on the surface finish)