Call Us Today On: 0333 600 1365
  • Inc VAT
  • Ex VAT
FREE Samples Direct to your door via Royal Mail.
FREE Delivery On all orders over £400 *
Our Reviews
Found it Cheaper? Ask us about our price promise

Treatex Colour Tone Light Oak 1L 11081e

Treatex Colour Tone Light Oak 1L 11081e

£21.93 Excl VAT £26.32 Inc VAT
For delivery on 23rd September 2019, order this item in the next .

Availability: In stock

FREE Delivery On all orders over £400 *
less
more

Additional Information

Treatex® Hardwax Oil Traditional - Light Oak

Treatex® Hardwax Oil Traditional preserves and enhances the appearance of all types of internal wood such as flooring, worktops, stairs, furniture, and internal joinery. Treatex® Hardwax Oil Traditional is manufactured on a base of natural sustainable raw materials including: linseed oil, sunflower oil, jojoba oil, beeswax, carnauba wax and candelilla wax. Available in clear matt, satin, gloss and in a range of colours.

  • Easy to apply.
  • Quick drying.
  • No sanding required between coats.
  • Low odour.
  • Water resistant.
  • Withstands high temperatures.
  • Very durable.
  • Easy to clean with Treatex® Floor Care.
  • Easy to maintain with Treatex® Wax Polish.
  • Spot repairable.
  • Recommended for those with dust allergies; dirt and dust can be removed easily.
  • Meets with 2010 VOC emissions regulations.
  • Certified safe for use on children’s toys: DIN EN 71-3.
  • Complies with regulation DIN 68861-1B: Resistance to substances such as wine, beer, coffee, tea, fizzy drinks etc.
  • Slip resistance certified for commercial use: DIN-51131,
    EN-13893.
  • Antibacterial, kills 99.99% of Staphylococcus aureus (MRSA), Escherichia coli (E.Coli)and Klebsiella pneumonia. Antibacterial properties tested using standard JIS Z 2801:2000.

One coat of Treatex® Traditional Colours should be brushed on to unfinished timbers and any excess should be clothed off. Finish with two coats of Treatex® Hardwax Oil Traditional Clear.

Hardener

Treatex® hardener is a chemical additive that can be used in commercial locations to increase surface hardness by at least 10% by mixing 10% hardener to Treatex® Hardwax oil. Can be used in both coats or just top coat if required.

Oily / Dense Timbers

Use Treatex® Isoparaffin when treating oily/dense timbers e.g. Iroko, Ipe, Teak, Jarrah, Merbau etc. Treatex® Isoparaffin is used to thin Treatex® Hardwax Oil Traditional so that it can properly penetrate into oily and dense timbers. For the first coat mix approximately 10% Treatex® Isoparaffin with Treatex® Hardwax Oil Traditional.

 

 

Product Faqs

Ask a Question


Ask a Question

No Faqs Found !

For more information please go to the Delivery Information page.

Always refer to the manufactures fitting instructions which are located inside the packaging. For more specific guidelines please get in touch 0333 600 1365.

Regular cleaning is the key to keeping your wooden, laminate & vinyl floors at its best. By following our step-by-step instructions on preventive care measures and daily floor care, your floor will retain its beauty for years to come.

General Floor Care Tips

  • Use water sparingly while cleaning your wooden floors. Make sure to soak up liquid spills immediately as excessive water causes the floors to swell.
  • Avoid wax, vinegar and “all-purpose” cleaners, since they dull the floor’s finish.
  • Do not let sand, dirt or grit build up. Vacuum or sweep your floors once every week.
  • Place mats or rugs near doorways and in high trafficked pathways to trap sand and grit.
  • Use protective pads or caps on furniture.
  • Trim your pet’s claws to help avoid scratches on the floor.

Regular Floor Care

  1. When your floor looks dirty, spray it with the appropriate Floor Cleaner to dissolve the dirt.
  2. Wipe the floor clean using a Microfibre Cleaning Pad on your Mop.
  3. Rinse the pad in water as it becomes soiled and wring it thoroughly before continuing to clean. Excessively soiled pads may be laundered.

Periodic Maintenance

  1. Vacuum the floor carefully. Clean it using the appropriate Floor Cleaner and a Microfibre Cleaning Pad on your Mop.
  2. Apply the appropriate Floor Polish* or Refresher** with an Applicator Pad. Apply one even coating over the whole floor. Let dry for at least 2 hours.

For full range of cleaning & maintenance products please click through HERE